If your product is expected to operate in harsh or unpredictable environments—whether on the battlefield, in emergency response, or even in rugged industrial settings—you’ve likely heard of MIL-STD-810.
MIL-STD-810 is a United States Department of Defense standard that outlines a wide range of environmental test methods for determining how well a device holds up under extreme conditions. These tests simulate real-world stressors like temperature shock, vibration, humidity, sand and dust exposure, and more. But contrary to popular belief, MIL-STD-810 is not a one-size-fits-all checklist—it’s a flexible standard designed to help you validate that your specific product can withstand the specific conditions it will face.
In this blog, we’ll walk through exactly what it takes to meet MIL-STD-810 standards. To do that, you first need to understand your product’s intended use case.
MIL-STD-810 includes dozens of environmental test methods, each simulating a different kind of real-world stress—from high-altitude pressure and explosive atmospheres to repeated mechanical shocks and salt fog exposure. But not every product needs to pass every test. The standard is meant to be tailored to the environment your product will actually encounter, which is why use-case planning is your first—and most critical—step.
Before jumping into design or material selection, you need to develop your product requirements document (PRD). This document outlines what your product needs to do and how it will do it, and one key aspect of it should be what environment it’s working in and how it’s supposed to perform there:
By clearly defining your operating environment up front, you avoid over-engineering in some areas and under-engineering in others—resulting in a more efficient, cost-effective product that’s fit for purpose.
MIL-STD-810 standards shouldn’t be an afterthought, but rather designed into the product from day one. Below, we’ve outlined some key areas where these standards must be considered in the design process.
In the early design phase, CAD modeling plays a critical role in simulating how your product will behave under stress. For example, if you're designing a push-to-talk device for military radios, your CAD model must allow for appropriate PCB and electronics protection, precisely engineered gaskets and sealing interfaces, and materials that are appropriate for the environment of the product. If you wait until testing to address these factors, you're likely facing costly redesigns and delays.
Design for Manufacturing (DFM) ensures your product isn’t just theoretically rugged—it’s also practically manufacturable. Every component must be engineered with consistent, repeatable production in mind. At DEM, this means bringing together our engineering, production, and quality departments early in the process to validate that the product can be built to spec every time.
Material selection is another make-or-break decision that must align with your MIL-STD-810 requirements. The right materials can protect your product from temperature extremes, shocks and impacts, UV and chemical exposure, salt fog, saltwater immersion or fluid contamination. When you work with DEM, the specific materials that we recommend consider the environmental stressors it will endure while still being conscious of weight for the use case.
Once your product is designed and built to withstand the environmental conditions defined in MIL-STD-810, it’s time to validate that performance through testing.
MIL-STD-810 lays out detailed test procedures across a wide range of categories, including:
Each method includes very specific procedures, including setup, duration, cycles, and recovery evaluations. To meet the standard, you must follow the correct method, simulate the correct environmental condition, and clearly document every step.
At DEM Manufacturing, we understand that products designed for high-stakes environments don’t get second chances. That’s why we help you get it right the first time.
From early-stage design to performance validation, our team ensures every detail is engineered to meet the demands of MIL-STD-810. We’ve developed rugged electronic components for:
On top of this, our vertically integrated operation allows us to take products from concept to production in as little as 10 weeks, without compromising on quality or compliance.
If you’re creating a MIL-STD-810-spec product, talk to an expert at DEM to accelerate development, reduce risk, and meet the standards that matter most.